FRP Composite Panel Application

FRP composite panel is an important material for engineering walls, carriages, truck body, cold storage, etc. It also solves the traditional wall materials that are difficult to clean, easy to rust and corrosion, easy to sag and deform, difficult to install, poor durability, easy to wear, and impact resistance. The problem of poor quality has gradually replaced stainless steel plates, aluminum plates, color steel plates, ceramic tiles, and paints. They are widely used in: RVs, buses, trucks, cold chain transport vehicles (refrigerated and insulated vehicles), containers and shelters (communication, medical ) And other special cabinets and construction fields.

Main feature:

1. Weather resistance: FRP sheet is a thermosetting polymer material with good temperature resistance. The service temperature is between -40℃ and 120℃.

2. Impact resistance: As the sheet structure contains crisscrossed glass fiber reinforced materials, the impact resistance of the product is greatly improved. It is not easy to deform or break under the impact of light impact, gravel and hail.

3. Corrosion resistance: It can withstand the corrosion of various acids, alkalis and other chemical substances, and is especially suitable for use in coastal areas and areas that are prone to rust and corrosive media due to heat and humidity.

4. The high-quality m-phenylene neopentyl glycol gel coat used on the outer surface of the glass fiber reinforced plastic composite board has excellent performance and has good chemical stability to the atmosphere, water and general concentrations of acid, alkali, salt and other media; it is precisely because of this layer The special gel coat increases the brightness of the surface of the carriage and the wall, has excellent gloss retention, is not easy to change color, is resistant to corrosion, is resistant to light, and is anti-aging. It is very suitable for the interior and exterior materials of the carriage and wall.

5. FRP composite panel has light weight and good strength, which is much lighter than aluminum composite panel and steel compartment panel. It can effectively reduce the car body, increase the load, and improve the quality coefficient of the van.

6. FRP composite panel, the rigidity of the box board is very good, and the recovery ability of FRP is good, which can effectively avoid the deformation problem caused by the shaking and impact of the vehicle during the driving and transportation.